Shanghai SuiXing electromechanical Development Co. Ltd.

NEWS	Shanghai Sui Hing Electrical and Mechanical Development Co., Ltd CHINACOAT 2016, the 21th China International Coating & Ink & Adhesive Show, will...

The working chamber of the machine is equipped with a set of stator and rotor, the drive shaft is directly connected with the motor, the structure is simple, the processing capacity is large, and it has certain conveying function. Can be a separate stand-alone work or with high and low speed mixer, auxiliary dispersion, mixing, homogeneous use, efficiency and product quality is significantly improved. But also as a terminal discharge pump, to further ensure the quality of the material.

Used in petroleum, chemical, household chemicals, textiles, food and other industries decomposition, dissolved, dispersed and homogeneous process. Provide a small test - pilot - large production of a full range of products, to meet the different installation conditions and non-standard requirements.

Equipment characteristics

● With continuous mass production processing capacity, no dead ends, narrower range of particle size distribution, even higher, easy to operate, can be automated operations.

● compact structure, easy installation, small footprint, stable operation, low noise.

● Working chamber with cantilever drive, can achieve axial feed, radial discharge.

● Suitable for high temperature, high viscosity, high flow and other working conditions such as modified asphalt, emulsified asphalt, pulp dispersion, plastics, rubber, environmental protection and other fields.

● Optional seal form: mechanical seal, skeleton seal, packing seal.

● With the tank can be used for continuous operation of the tandem process, can also be used for recycling process, this design ensures that all the materials into the mixing container before the exit must be through the precision with the stator and rotor gap , The extraction capacity of the material enough to suck up, and then go down without auxiliary pump, a special single or double mechanical seal for a strong process.

SXRH-05 Helical type

Advantages

With high precision

Can be quantitative discharge

Can be quantitative delivery

No air infiltration

Cut, decentralized, homogeneous ability

Mix and emulsify to make the emulsion easier

The maximum operating temperature of up to 300 ℃

安装与选型

功率kW	转速rpm	A	B	C	D	E	F	G	H	I	J DN	K DN	流量 m3/h	n-d
1.1	2900	575	90	180	150	20	300	220	280	250	32	25	0-1	4-14
2.2	2900	575	90	180	150	20	300	220	280	250	40	32	0-3	4-14
4	2900	743	137	224	182	25	400	320	375	346	50	40	0-5	4-14
7.5	2900	743	137	224	182	25	400	320	375	346	50	40	0-8	4-14
11	2900	864	140	250	190	25	480	405	420	380	65	50	0-12	4-14
15	2900	916	140	250	190	25	480	405	420	380	65	50	0-18	4-14
22	2900	986	140	270	190	15	550	475	450	410	65	50	0-25	4-20
37	1450/2900	1400	150	300	230	15	1300	1220	550	480	80	65	0-35	6-20
45	1450/2900	1485	150	325	240	15	1300	1220	590	520	100	80	0-50	6-20
55	1450/2900	1800	150	350	250	15	1500	1420	660	580	100	80	0-75	6-24
75	1450/2900	1920	180	380	260	15	1500	1420	720	640	125	100	0-90	6-24

Note: The flow range in the table refers to the data measured when the medium is "water". The outlet pressure of the model listed in the table is ≤0.2MPa.

Such as the use of recycling technology, it is recommended with the intermittent high shear dispersion emulsifier used in conjunction.

If there is high temperature, high pressure, flammable, explosive, corrosive and other conditions, must clearly provide accurate parameters, so that the correct selection of custom.

On the poor mobility of the media, it is recommended at the entrance with the flow of the pump to match the pump pressure of ≤ 0.2MPa.

The data in this form are subject to change without prior notice. The correct parameters are subject to availability.

Pipeline emulsifying machine (single stage)

Pipeline emulsifying machine

Equipment characteristics

安装与选型

视频

快速查找产品

联系方式